nicmosque6

15 Interesting Facts About Auto Ghost Immobiliser That You Didn't Know

Sat, 07 Dec 2024 04:08:38 +0000

Ghost Immobiliser – Protect Your Vehicle From Auto Thieves Ghost immobilisers protect your vehicle from auto thieves. It's low-cost and simple to install. It connects to the CAN bus and operates through your ECU (engine control unit). It produces an exclusive PIN code that you have to enter prior to you start your vehicle. In combination with car alarm systems and tracking devices, it can help create a robust defense against thieves. Theft Prevention If you have installed a ghost immobiliser in your vehicle, thieves may have a difficult time starting the car. This is because the system will ask you to enter a pin number, or a particular sequence of buttons that only you are aware of. If they cannot do this, then they will try to steal your car, and could even be deterred. With the number of car thefts rising each year, it's a surprise that car owners are seeking ways to safeguard their pride and joy. Ghost immobilisers are a fantastic option to accomplish this, since they stop contactless theft by preventing thieves to start your car without a valid fob or key. They also stop hotwiring, a common type of theft which has become more common as thieves have gotten more tech-savvy. These systems are also undetectable to burglars, since they do not emit radio signals. This makes them an excellent addition to a wide range of security measures including alarms and GPS trackers. Multi-layer security makes it harder for thieves to take cars. Keeping your security systems updated can also help keep you safe from the latest theft tactics. The best part about a ghost immobiliser, is that you can put it on your vehicle without leaving any marks. This will keep the value of your vehicle and its interior in tact. It connects to the CAN system within your vehicle, and makes use of the electronic buttons on your steering wheel and dashboard, as well as the door panels to create a unique PIN number which you need to input before you can start your vehicle. It is similar to a password you enter on computers, and it can be as long as 20 characters, making it almost impossible to bypass. This type of security is also compatible with a variety of vehicles. It can be installed on motorbikes, cars, caravans, trucks and even lawn mowers. It also protects against signal jamming aswell as key cloning, device spoofing and other methods used by thieves to bypass security measures. Peace of Mind A ghost immobiliser is a cost-effective way to protect your car against theft. It is simple to install and leaves no traces or marks on your car. browse this site is perfect for people who take care of their cars, and especially those who intend to sell them in the near future. This is particularly beneficial for luxury vehicles, which can lose value in the event of theft. The device works by generating an individual pin code that is required to start the engine. The owner can alter the length to whatever they wish. The device is connected to the existing interface of your vehicle, like the steering wheel, the centre console, or door cards. The system will be able to recognize any attempts to start the engine using a different key or fob and will issue an emergency PIN to the owner via their smartphone. This is a great deterrent to criminals who attempt to clone or hack the keys to your car, as they'll be unable to start the car without the correct pin code. This is a useful tool that can be used together with an electronic tracker device to locate your vehicle in the case of theft. The ghost immobiliser is also a great way to discourage thieves, since it can detect any vibrations in or around your vehicle. This could be a sign of someone attempting to steal the vehicle and the system could notify its owner's mobile phone. When you need to dispose of your vehicle to be cleaned or serviced, the device can be set to “service valet” mode. This can be activated using the pin code you have chosen, and can be easily activated after you return to the vehicle. This means that you can hand over your vehicle to a valet or transport company with confidence knowing that it will be secured from any unintentional activities. The Autowatch Ghost II CAN immobiliser can be put into “service transport mode” in the event that you need to drive it from one garage to another, for instance when you are preparing for an MOT or servicing. Increase the value of your vehicle In a world with car thefts that are at an all-time peak it is essential that drivers do their best to keep their cars safe. Modern technology is constantly improving and creating new anti-theft strategies. One of these is the Ghost Immobiliser, which is a device that can be incorporated in your vehicle to shut off its engine when a certain PIN code is entered. The Ghost Immobiliser is a highly efficient and reliable anti-theft device that works in a very simple manner. It communicates with your vehicle's ECU through the CAN data circuit in order to generate a unique number that you have to enter to start your car. The device does not emit radio signals, like traditional immobilisers. This makes it impossible for thieves and other people to detect or to bypass the system. Instead, it requires a PIN code that can be entered using the buttons on your dashboard and the steering wheel. The great thing about a ghost immobiliser is that it's hidden and completely unobtrusive, so it is not something that will detract from your car's appearance or performance. It is a discreet and low-maintenance alternative that can be installed on any vehicle and will not interfere with the normal operation of the vehicle. Another advantage of a ghost immobiliser is that it helps to maintain the value of your vehicle when it comes time to sell it. Potential buyers can be wary of purchasing the vehicle that was stolen and installing this device can help you get a better price when selling it later on. It's a good idea consider advanced security features for your vehicle particularly with car theft rates in Essex and London are on the rise. Professional installers can easily install a ghost immobiliser, which is a quiet efficient and secure option. Essex Tuning offers Ghost Immobiliser Installation near you, to make the process easy. You can trust the company because of its commitment to customer service, security enhancement and security. Easy to Install Ghost immobilisers are an additional security measure to stop tech-savvy thieves from cloning and stealing your vehicle. It works by making it impossible for criminals to begin your vehicle, even if they have the correct keys. It uses buttons on your vehicle, such as those on the steering wheel as well as the central console to create an unique pin code that has to be entered to start your car. This means that if your vehicle has a ghost system fitted only you will be able to drive the car you love. The device is small and is able to be concealed in a variety of places. It does not have LED indicators or key fobs, so it is unlikely to be detected by thieves. It is also tamper proof and only activated by your personal PIN code. You can change your code at any time. It's a great method to safeguard your vehicle from hackers and thieves who might be planning to hack your vehicle or copy it. Installation is a specialized process that should be performed by a professional. It involves wiring the Ghost 2 into the vehicle's CAN bus network, so it can communicate directly with the ECU. It can be fitted to any vehicle from motorhomes to cars and vans. It can even be utilized on vehicles that have electric engines, such as ride-on lawnmowers. Installing the Ghost immobiliser begins with finding a power source that has a constant 12V. Utilize a wiring diagram to locate the CAN high and CAN low wires in your vehicle. Strip a small piece of each wire using a stripper. Then mark the wires with labels or a piece of tape to help you differentiate them from one another when you install them. Next, connect the CAN H and L wires to your vehicle's engine controller unit. Make sure that you are able to connect them securely through soldering or using high-quality connectors. Use cable ties to bundle the wires and connect them. Verify that the connections are strong and insulated.

Ghost Immobiliser Fitter: The Good, The Bad, And The Ugly

Sat, 07 Dec 2024 02:12:56 +0000

Ghost Immobiliser Fitter Ghost immobilisers are among the most effective ways to protect your vehicle from thieves. They prevent vehicles from getting started until the correct code is entered. They can also be used to track vehicles remotely. These systems are becoming more well-known, and many insurance companies offer discounts to drivers who have them installed. It is tamper-proof. The Ghost Immobiliser, a high-tech security device, stops your vehicle from beginning without a unique PIN or beacon. The system is discrete and can be customised to match your vehicle, making it a highly efficient anti-theft device. It is crucial to test your system following installation to ensure that it is working as it should. By entering the PIN and then starting the engine is a quick way to check that the system has been installed correctly. Regular testing will reveal any problems or issues with the system as quickly as is possible. The system communicates directly with the ECU and will not allow your vehicle to start unless you enter the correct sequence. You can do this using the electronic buttons that are located on the steering wheel or via an app that you can download on your smartphone. Its low profile and tamper-proof design make it difficult for thieves. It can also be used as a beacon to track the whereabouts of your vehicle. It's a great method to safeguard vehicles that have been modified or cars that are costly or are rare. This tamper-proof gadget uses the buttons on your steering wheel to generate an exclusive sequence that you only know. The sequence is mathematically impossible for thieves to guess, and can be easily altered by using a secure reset code. It can be installed in almost all vehicles and is easy to install with the aid of technicians. After you have installed the device, you will need to connect it to a power source as well as a grounding point. Find the wiring diagram of your vehicle to identify the wires required. To prevent short circuits or electrical damage, insulate all connections using heat-shrink tubing or insulation. Check the mounting of the device as well as its connections to ensure there isn't any indication of altering the connections. Ghost 2 can be set up in Service/Valet mode for older vehicles which require battery isolation during servicing or maintenance. This will turn off the device with an unique pin code. This will prevent it from being turned on again by thieves. It's wireless. Ghost immobilisers are not detectable by thieves, in contrast to other anti-theft devices. They can be installed in various vehicles to protect them against hacking and key cloning and attacks using signal relays. They also connect to the CAN network and are used to track vehicles remotely. They can even notify owners instantly if their car is stolen. Some insurance companies offer discounts to customers who purchase them. It is the most effective way to avoid car theft. The Ghost II immobiliser offers a inexpensive and easy way to protect your vehicle from theft. This discrete device operates wirelessly and is compatible with a wide range of cars. It is weatherproof and tamper proof which makes it a great choice for any vehicle. It also has a three-year warranty. The Ghost II is unlike other security products in that it doesn't require additional wiring or other components. Its unique pin code sequence protects your vehicle from key theft and key cloning by blocking the engine from starting unless a special disarm sequence is entered. This sequence can range between one and 20 buttons, meaning that thieves will need to invest much more time trying to break the code before they can escape. Another benefit of the Ghost II is its ability to stop signals from a thief's key fob. It can determine if a key fob is stolen, hacked or copied and disable the engine by triggering an alarm. It can also prevent the use of the signal relay device which is frequently used by organized car-thief groups to gain access to a vehicle. It is crucial to test the Ghost Immobiliser system regularly to ensure that it's functioning as intended. This will help you spot any issues early and address them before they become serious. It is recommended to test the system by entering the PIN code and then starting the engine as part of your regular check-ups of your vehicle. It is essential that the immobiliser is mounted in a place that is not accessible by thieves. If you can, place the unit behind your dash with cable tie. Make sure all connections are properly insulated and cannot be altered by thieves. Also, verify the location of the mounting to ensure that it's secure. It can be used with a range of vehicles. The ghost immobiliser is an efficient security device that can help prevent car theft. It works by preventing the engine of your vehicle from running until the correct pin code is entered. This code can be created by pressing the buttons on the steering wheel, door panel or on the centre console. The immobiliser is safe from tampering and is reprogrammable by the owner at anytime. It also guards against key-cloning and hacking. It is recommended that you engage a professional to install the Ghost immobiliser. The process of installation is complex and any mistakes could render the device unusable or damage your vehicle. DIY installation could also invalidate the warranty of both your Ghost Immobiliser as well as your vehicle. browse this site for your vehicle model is a good place to begin. This will give you an overview of the CAN H wires as well as CANL wires used to power the immobiliser. Once you've located these wires, mark them to ensure that they're not accidentally disconnected during the installation process. Select a safe and reliable grounding point. It is a good idea to test the immobiliser after the wires are connected to ensure that everything is functioning properly. After that, you can enter the PIN code to start your engine and verify that it starts correctly. It is also a good idea to test the immobiliser frequently to ensure that it continues to function in the way it was intended to. The ghost immobiliser has the benefit that it doesn't require LED indicators or keyfobs. It can be deactivated by a unique sequence that is displayed on your door panel, steering wheel or centre console. The immobiliser will leave no trace of its installation, which makes it difficult for thieves to locate. It can be used to increase the security of your car in the event of an attack. Many insurance companies recommend it. Easy to install The Ghost immobiliser is an sophisticated device that keeps your vehicle safe from the most skilled thieves. It prevents your car from starting until a unique PIN or sequence is entered with the key fob. This stops hackers from hacking, cloning and even key theft, so thieves are unable to steal your vehicle. It uses a variety of sensors to detect attempts to drive away and alerts the owner or police in the case of the tampering. Installing a ghost immobiliser could be difficult, particularly for those with no experience with alarms or other security systems. It is crucial to have the proper tools and materials to ensure an efficient installation. A multimeter is a great tool to check electrical values, while insulation tape and cable ties can protect connections. The Ghost immobiliser user's manual contains specific instructions that are tailored to the specific model and wiring of your car. It is essential to verify the locations of the wires for CAN H andL during the installation to ensure accuracy. They are vital to power the immobiliser. Any errors could lead to an ineffective system or even failure. Label the wires with labels or tape so you can keep track of them. You should also identify the source of constant 12V and a grounding. Once you've found the right place, you can start assembling the ghost immobiliser. To avoid short circuits or a mistaken airbag deployment, you will need to disconnect the battery first. You can then begin connecting the wires. Make sure to adhere to the directions in the user's manual to ensure a clean and secure installation. Once you've completed the wiring, connect the Ghost immobiliser using CAN to the engine control unit. It will be a challenge for thieves, as the device is directly connected to the engine control unit. They can't remove or disable it. It's also secure against tampering, and the only way to disable it is by entering a personal pin code. This pin code is only available to the vehicle owner and the installer. You can also use Ghost immobiliser to temporarily permit another person to drive your car, for example when you are away on business or need service. This feature is referred to as the Service/Valet mode, and it can be activated with a key fob, or a mobile application.

10 Strategies To Build Your Autowatch Ghost Installers Near Me Empire

Sat, 07 Dec 2024 00:50:28 +0000

Autowatch Ghost Installers Near Me Autowatch Ghost is an anti-key clone device which connects directly to the vehicle's CAN data network and requires the use of a PIN code in order to start the car. It also has the feature of Valet/Service mode which stops thieves from utilizing signal spoofing and device spoofing. Installers who are registered with TASSA can complete the installation in a few hours. Ghost works in silence without radio signals and is easy to transfer from one vehicle to the next. Installers who have been registered with TASSA Ghost is a concealed car immobiliser which uses the buttons on your car to generate an encrypted PIN code. It is protected from key cloning and relay theft. It's a more affordable alternative to car locks and wheel lock alarms. It also works without radio signals and is therefore unnoticeable by modern thieves. The device works by connecting to the CAN data network, and cannot be detected through diagnostic scans or by code-grabbing technology. It can be easily installed anywhere in the car, and is an easy fix for a variety of vehicles. A TASSA registered installer can assure that the system purchased is of top quality and has been tested by experts. The company should be able provide support in the event you have any issues with the product. This is important because when the system fails you may be required to pay for repairs. An experienced installer should have a thorough understanding of vehicles and the most effective security solutions. Autowatch Ghost is one of the most fool proof aftermarket car security systems available. This system can stop the most experienced thieves from committing crimes by requiring them enter a password in order to start your vehicle. The password is only entered using the original buttons of your car and is chosen by you. The system is weatherproof and can be placed in various locations in your vehicle. The system is compatible with the majority of CAN bus-driven cars however it is recommended to consult your local installer to confirm that your vehicle is suitable. A TASSA registered company will install the Ghost Immobiliser which is an insurance Approved Device. This means you can receive a lower cost for insurance and the company has also passed strict tests to install the device. These checks include CRB checks, as well as identification checks for engineers. Car Theft Solutions UK is an TASSA registered installation company, and all of its engineers have passed the checks. Contact Recommended Web page by phone or email us via our website if you are interested in knowing more about how we protect your joy and pride. We are a family-owned business and have built an outstanding reputation based on the satisfaction of our customers. Ghost is a system based on the CAN-bus Autowatch Ghost is a revolutionary CAN-bus technology that protects your vehicle against key cloning and theft. It works by interacting with the CAN-bus network of data in your vehicle and preventing the engine from beginning. This is a very effective and cost-effective security system that provides unbeatable protection against key hacking, remote hacking and other threats. It is TASSA-approved, works with vehicles tracking devices and is acknowledged by insurance companies. This exclusive and patented technology lets you protect your vehicle from theft without the need for an additional remote or keyfob. It makes use of the buttons in your car to create pin codes that are unique and can only be activated manually. It is totally inaccessible to anyone in your vehicle and is unable to be deciphered by spoofing or jamming tools employed by thieves. This makes it a great option for classics, sports cars and other prestige vehicles. The system is simple to transfer from one vehicle to another this means that should you ever sell your car you can simply remove the device and place it in a new vehicle. The system has an emergency battery that will ensure that it is operational in the event of an emergency power outage. ghost 2 immobiliser problems is also tamperproof, meaning that it cannot be destroyed or bypassed. In contrast to other systems that rely on radio signals to communicate with the car, Ghost utilizes the vehicle's CAN-bus that is a tamper-proof system that is not affected by hacking. The technology is also agnostic, and works with all major car brands, including Mercedes-Benz, Porsche, Volkswagen Audi and BMW. Each Ghost Immobiliser anti-key clone CAN Bus immobiliser is programmed with a unique override code that will be given to you on a scratch card and instructed to you at the time of installation. The code will permit you to temporarily start and drive your car without the pin code. It is easily changed back to the original pin code at any point. The QR fingerprint code is a new feature that has been included in every Ghost installation since March 2020. This adds an additional layer of protection for your car and will be added to our insurance database once the installation is complete. This makes it almost impossible to resell or demolish your vehicle since it will be obvious that it's not yours, and in the event of your car being stolen and its identity hidden (plates changed, etc.) your car will be identified as yours by scanning the QR code. It is easy to transfer from one vehicle to another A Ghost immobiliser is a low-maintenance option for safeguarding your vehicle from theft via keyless keys. It does not require the installation or additional hardware, and it can be easily transferred from one car to another. It doesn't interfere radio signals, which means that thieves can't access your car's system. It can be put on any vehicle, and it could save you money on your insurance premiums. This innovative immobiliser works by connecting to the CAN data network of your vehicle, and requires an individual PIN code to activate it. This stops key cloning and hacking as well as ECU swapping. It also safeguards your car in all respects. It is an excellent alternative to wheel locks, car alarms and trackers. It is a weatherproof, discreet, and silent device that is able to be installed without the need for wiring. The device utilizes buttons on the steering wheel or central console of your vehicle to generate an individual pin number that needs to be entered to allow the start-up. The system includes an iPhone application that allows you to control it remotely and also receive notifications. You can also use the app to modify the pin code in case you lose or break your key fob. It is also able to be arm and disarmed from your phone and makes it more secure for your vehicle rather than the traditional car alarm. This is a great option for those who have put a lots of time and money into their favorite thing and are looking to protect it from thieves. The Autowatch Ghost 2 system is TASSA approved and can be fitted into any vehicle. It is also recognized by a few insurance companies due to its additional security. It is completely secure and cannot be detected by radar scanners or signal jammers. Its sophisticated technology is able to detect vibrations and attempts to start the engine and can even track your vehicle if it's been stolen or lost. This device can be used with an GPS tracker to locate your vehicle in the event that it was stolen. It's a great alternative to keyfobs and keyless entry systems and is cheaper than an immobiliser that is traditional. It is a service/valet mode, allowing the vehicle to be driven while it is being worked on. It is a low-maintenance solution Ghost is a subtle system that communicates with the CAN data network of your vehicle. It is weatherproof and may be mounted on the dashboard, under the steering wheel or central console. It's not detectable by diagnostic tools and is undetectable to the passengers in the vehicle. The system communicates with the buttons on your vehicle and generates an individual pincode sequence that must be entered to start the car. This makes it impossible for thieves to copy or alter your ECU without your knowledge. It's an easy and cost-effective way to protect your precious possessions from theft. It is compatible with all vehicles and can be monitored by using a smartphone app. It can even be utilized in conjunction with a tracker in order to locate your vehicle in case it is stolen. It can also help lower insurance costs. The Ghost immobiliser is able to be combined with a dash camera for additional security. It differs from other immobilisers because it does not use radio frequencies, making it difficult for thieves to interfere. It can be installed on any vehicle, from sports cars to classics. The system is easy to use and requires no special maintenance. Its compact size allows it to be concealed easily and the app can be accessed on any tablet or smartphone. Its range extends up to 30 meters and you can use the valet mode in order to provide an additional layer of security when you leave your car with a mechanic or a family member. It's an excellent option for those who wish to safeguard their vehicles from thieves, but do not want to pay monthly costs for tracking devices.

5 Laws That Can Help The Ghost Ii Immobiliser Industry

Fri, 06 Dec 2024 23:25:09 +0000

Ghost II Immobiliser Protect your vehicle from key-cloning, hacking and vehicle theft. It's silent and undetectable to a would-be thief because it doesn't use LED indicators or key fob tags to signal that it's there. It is also possible to temporarily disabled by using Transport Mode for scenarios like transporting your vehicle or when your vehicle is being repaired. Simple Change of PIN Code Ghost is a groundbreaking next-generation security device that can protect your vehicle without cutting wires or installing aftermarket alarm or immobiliser key fobs. It connects directly to your vehicles CAN Data Network and a personal PIN Code can be programmed into it by using the buttons of the factory on the dash and steering wheel. This code will stop the engine from starting and is not detected by any RF scanning technology or code-grabbing technology that is currently in use. The system also has an emergency Pin Code override in case the user forgets their code or a button to program becomes inoperative. The system also comes with the Service/Valet Mode, which allows the vehicle to be started temporarily and driven without requiring the use of a valid code. This makes it ideal for transportation or servicing. The UK automotive aftermarket, while growing, is not free of theft. The OBD port on your vehicle can be hacked by thieves in order to avoid traditional deterrents such as locking your steering wheel and wheels. This can be done using an laptop, a USB cable, and an inexpensive OBD scanner available online for under PS50. It is crucial to safeguard your vehicle with an immobiliser Ghost II to prevent theft. It's a small device that can help prevent vehicle theft. Once you know your PIN number it's simple to use. The device is sealed inside a tiny box and can be installed inside the wiring harness of your vehicle. It is also weatherproof and can be put anywhere in your car which makes it difficult for thieves to find. It is also simple to install and comes with a warranty. Weatherproof tiny device The device is connected to the CAN data network in your vehicle without cutting any cables and operates quietly. It can be programmed using a an individual PIN code by using the buttons on the steering wheel as well as the dashboard to avoid theft. browse this site is equipped with an GPS tracker built-in. It is activated by an app that you can download on your phone and is recommended by several insurance companies. It is weatherproof and can be hidden inside the vehicle so that it is nearly impossible for thieves to steal. Ghost II is silent, in contrast to traditional systems that are audible to criminals. It requires between 4 and 21 button presses on the buttons of the vehicle. The vehicle owner can alter the sequence according to their preferences and it's not susceptible to being hacked. There is a mobile app that can be used to disable the system. If you are selling your vehicle, there's also a master reset code which can reset the immobiliser's CAN bus. Modern thiefs are able to use diagnostics to detect circuit breakages on modern cars however, the Ghost does not contain any circuit cuts. Our team of CANbus fitters can install this system into an automobile with confidence. linked website is compatible with any vehicle, in contrast to other CANbus immobilisers that may require a key fob. The technology behind it is so advanced that it protects against a range of security threats, such as signal relay attacks and ECU swapping. It is also compatible with a variety of smartphones and can send owners an alert in the event that the vehicle is operated by an unauthorised person. Every vehicle is tested Ghost is an innovative immobiliser system that shields your vehicle from key cloning, hacking and even key theft like no anywhere else available today. The thief must physically remove the device from your car and then transport it to a trailer and reinstall it on another vehicle to take over the Ghost protected vehicle. It also protects against the use wheel locks as well as jumper cables and universal keys. This system is incredibly simple to set up and works without a sound. It connects to your vehicle's CAN data circuit which allows it to communicate directly with your ECU (Engine Control Unit). It is so small and sealed that it can be installed anywhere in your vehicle. Once it is installed, it stops the vehicle from starting until the specific sequence of disarming is entered using the buttons on your vehicles steering wheel or door panels, or on the centre console. It can be up to 20 digits and allows you to select the level of security you want to be. It can also be used to activate a Service/Valet option that allows you to temporarily start and drive your vehicle without needing to enter your PIN. It uses a CAN data circuit, which means there aren't radio frequencies like the traditional immobiliser. This means a thief can't listen to the relay and attempt to determine the PIN code being entered. It also has no circuit cuts and can't be detected by diagnostics tools or by RF scanning or code-grabbing technology. At Boundary Car Care we have been incredibly proud to be certified installers of this fantastic product for a long time and are incredibly impressed with how well it performs and the peace of mind it offers our customers. It's a fantastic solution to protect your joy and pride in these difficult times. Emergency Pin Code override The Ghost immobiliser is a weatherproof and tamperproof device that stops your vehicle from starting if you don't have the correct PIN code entered. It is hidden within the wiring harness of your vehicle. It uses buttons on the steering wheel or dashboard to generate an individual code sequence. It is not a Thatcham device, since it doesn't use LED indicators and is connected to your vehicle via the CAN system. This makes it inaccessible by professional thieves who are able to detect alarm/immobiliser systems within modern vehicles using accessible diagnostic tools. If you'd prefer to temporarily disable your Ghost immobiliser it can be turned off by entering an emergency override code in the app on your smartphone. This allows you to loan your car to someone in your family, a friend or valet without sharing your pin. It's ideal for situations like servicing or when you need to leave your vehicle at a garage or valet. Ghost can be paired with the driver fob. This allows you to start your car with your key or via the app. This is ideal for parents with an infant who would like to drive the vehicle or you're not able to enter your pin number in a hurry or want to utilize the vehicle in case of emergency such as an accident. With a simple PIN change procedure, an easy-to-use interface, and a variety of security features, it's not surprising that the Ghost immobiliser is endorsed by a range of insurers and is secured by a assurance. Its sleek, compact and seamless integration into your vehicle's current systems makes it a vital accessory for high-performance or vintage automobiles. Service/Valet Mode The Ghost immobiliser is able to prevent vehicle thefts by blocking the communication between the key and the ECU. This means the engine won't start without a PIN number that is unique to the. It is also hidden in the wiring and is therefore difficult to notice. It does not have LED indicators that could give away its location. This is perfect for when you're looking to hand over your vehicle to a mechanic, or valet parking. Enter the code provided by your engineer at the time of installation to activate valet mode. This allows the vehicle to start without the need to enter an arm-disarm sequence. To exit valet mode, switch your car back to normal operation and the code will automatically change back to your normal pin. Ghost is designed to integrate with the CAN bus system in your car unlike other security products that rely on buttons or key-fobs. This gives it unparalleled protection against the latest methods of theft, such as key cloning and hacking. Once installed your engineer will guide you on how to arm or disarm your vehicle. All of this can be done through your smartphone application. Your engineer will generate a unique pin that is easy to remember, but mathematically impossible for thieves. If you forget your pin, don't worry as every installation comes with an Emergency PIN Code Override to restore your vehicle to working order. Our installers are fully trained and are able to install your Ghost correctly. All of our installations are carried out at the customer's premises. We offer a demonstration of how to use the device and mobile application. After your Ghost is installed, we assure its performance for the duration of time.